Products

We sincerely invite domestic and foreign customers hand in hand to achieve a win-win cooperation and create great wealth together.

HPMC for Self-Leveling

Product Description

The stable, smooth adhesion of the cellulose ether ensures excellent flow and self-leveling capabilities, and the operational water retention allows it to set quickly, reducing cracking and shortening. Adjust water lock.

Our low-viscosity products are suitable for self-leveling applications, which can enhance fluidity and pumpability, thereby improving floor efficiency, control water holding capacity, make water seepage less obvious, and have high formation strength and small shrinkage after drying, thereby greatly reducing cracks.

Inquire Now Next Product

Product Description:

Hydroxypropyl methyl cellulose (HPMC) is a natural polymer materials as raw materials,through a series of chemical processing and prepared non-ionic cellolose.Our production with high water retention,dispersion, good fineness, good work ability, easy dissolution characteristics.In the production of building materials, the cellulose is an essential less additives.

Cellulose Ethers Selection Guide
Product Type	G205	L40M	M50M	H60M	S70M	M50MS	S60MS	S70MS
Putty Powder	△	△△△	△	△		△	△
Tile Adhesive		△	△△△	△△△	△△△	△△△	△△△	△△△
Decoration Mortar				△△			△△
Gypsum Base			△△	△△		△△	△△
Mortar					△△△			△△△
Waterproof Mortar					△△△			△△△
Repair Mortar					△△△			△△△
Detergent Powder							△△	△△△
Soap							△△	△△△
Detergent							△	△△△
EIFS							△△	△△△
△△△ Highly Recommended △△ Recommended △ Suitable Viscosity tested in 1% solution, NDJ-1, 20℃

Product Paramenters:

HPMC G205	HPMC L40M	HPMC M50M	HPMC H60M	HPMC S70M
Appearance	White powder	White powder	White powder	White powder	White powder
Methoxyl group (%)	14-19	14-19	19-24	24-29	29-33
Hydroxyl propyl group (%)	4-12	4-12	4-12	4-12	4-12
Gelation temperature (℃)	60-90	60-90	60-90	60-90	60-90
PH value (1% solution)	5.0-8.0	5.0-8.0	5.0-8.0	5.0-8.0	5.0-8.0
Surface tension (dyn/cn, 2%sl)	42-57	42-57	42-57	42-57	42-57
Moisture(%)	9.0max	8.0max	7.0max	6.0max	5.0max
Particle size	80 Mesh passed 100%	80 Mesh passed 100%	80 Mesh passed 100%	80 Mesh passed 100%	80 Mesh passed 100%
Viscosity	30000~50000	50000~90000	80000~120000	120000-180000	100000~200000

Note: Viscosity in this table is measured by NDJ-1, 6r/min, 2%solution,20℃(mPa.s)

Factory Information:

Chemical Cellulose Ether (HPMC,MC,HEC, VAE, CMC) for construction from china factory powder
More than 20 years’ experience, 80,000㎡ environmental workshop, 400 workers, including 36 senior technical staffs and 18 for research, 800 meters from Shihuang Highway, this is how we keep good quality and competitive prices for global valued customers.

factory & equipment

Our factory equiped with international top grade machine,adopted with German Horizontal Reactor technique,Electronic automatic assembly line;New machines  are national standard equipment,more enviornment-friendly,and it can insure to produce while the enviornment protection period.

Applications:

HPMC can be used as thickeners, dispersing agent, self-leveling ,mulsifiers and film-forming agent. Its industrial products can be used in household chemical, synthetic resins, construction and coatings.

It can be used in:

Water putty powder
Cement mortar adhesive
Cement-based brick, tile and brick         base
Gypsum-based plaster board                 structure stucco
Cement-based structure stucco
Cleanling and daily use chemical
Toothpaste
Makeup
Paints

Functions:
1 It could enhanced water retention, improving cement, gypsum building materials fast enough to cause adverse drying and hydration
hardening, cracking phenomenon.
2 It could increase the plasticity of mortar, and it can be better bonded substrate to be adhered.
3 Because of its thickening effect,they are able to prevent the construction materials to be bonded mortar and slip phenomenon
appears.

FAQ:

Q1: Are you trading company or manufacturer?

We are factory.

Q1: Do you provide samples? is it free or extra?

Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q1: Do you accept customization?

OEM can be acceptable. We can produce according to your indicators.

Q1: How long is your delivery time?

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.

Q1: What is your payment terms?

T/T 30% in advance and balance against copy of B/L.